Skip to Content

UV LED Nail Lamp Not Working – A Checklist To Follow

UV LED Nail Lamp Not Working - A Checklist To Follow

UV LED nail lamps are an important part of your salon, spa or other nail business. The UV-C light emitted by the lamp improves the appearance of nails and stimulates natural nail growth.

However, if you notice that your UV LED lamp has stopped working, it is time to check the following list before you call in a technician.

Checklist for a Malfunctioning UV LED Nail Lamp

The UV LED lamp is a perfect tool for anyone who wants their nails done professionally. It allows you to have elegant whites without having any yellow stains on them from old school lamps, and it’s proven not only beneficial but also very effective!

The three most common reasons for a UV LED lamp to stop working are:
The power connection where you plug in your device with an adapter on it is dirty; if that doesn’t work then there could be something wrong within the electronic circuit board inside of either/both pieces. Lastly, maybe the power adapter isn’t working anymore and you need to replace it.

When a UV LED lamp is not working properly, there are several things you can do to troubleshoot it. Here is a checklist of steps to take:

  1. Check that you have the right power adapter. Always use an adapter with a voltage specified for your model of lamp, and make sure it’s plugged in all the way. If there is a switch on the side of the device to turn it on, be sure to flip it up so that it has electrical contact.
  2. If the power adapter is currently plugged in all the way and you have a switch on it, flip it up so there is electrical contact. If using a surge protector to plug your lamp into, take out the device from said surge protector.
  3. Inspect any external wires for damage such as nicks or cuts. Inadequate wire insulation can cause electrical shorts, which may cause the nail lamp to overheat and stop working.
  4. If there are any visible damages on wires, you will need to replace that wire or take it into a professional for repairs. If using an adapter try different outlets in your home without using their surge protectors. Sometimes this helps work around faulty wiring problems in your house.
  5. If your lamp is plugged into a surge protector and it still does not function properly try plugging the device directly into the wall without a surge protector.
  6. If this works, then one could assume that there is something wrong with your surge protectors. Try removing any filters from underneath the UV nail lamp light unit if you have them installed. These filters are often used to help diminish reflections and glare, however they can also create a hotspot and stop the lamp from working.

If all of these troubleshooting tips do not work, it is time to take your device to a professional for repairs because there is a high chance that the board is damaged.

Tips to Extend the Lifespan of Your UV LED Lamp

UV nail lamps are a must have equipment in every salon. Using the UV nail lamps, you can apply your favorite gel polishes on your nails which are not possible with just applying normal varnish.

However, the lifespan of this equipment is much shorter than its price tag. It requires proper care to extend its life and to make sure it works for a longer time.

Here are some tips to extend the lifespan of your UV lamp:

1. Provide proper ventilation for your nails dryer

UV nail lamps often come with a ventilation fan, which sucks up all the air around it and makes sure that the air is circulating properly. To further increase its lifespan, provide proper ventilation for your UV lamps to suck in fresh air. In case there is no ventilation, place a fan near the nail dryer. Make sure that you switch off the UV lamp immediately after applying the gel polish on your nails as it heats up quickly and stays hot for hours if not switched off properly.

2. Do not use UV gel or top coat with high pigment

Gel polishes and top coats with high pigment can quickly damage your UV nail lamp. The intense light emitted from the lamp can cause the pigments to break down and this will eventually shorten the life of your UV lamp. So, it is always advisable to use low or no pigment gels and top coats when using a UV nail lamp.

3. Protect your skin from nail dryer’s heat

UV nail lamps emit a lot of heat during the application process. Make sure that you do not put anything on top of it as this can cause damage to your skin and other belongings if they come in contact with the lamp. Also, make sure that you apply high temperature sunscreen if you are using the UV nail lamp frequently to protect your skin from the heat.

4. Clean your lamp regularly

It is important to clean your UV nail lamp on a regular basis to remove any build-up of products that can shorten its life. You can use a soft cloth and some rubbing alcohol to clean the lamp. Do not use any harsh chemicals to clean the lamp.

5. Use original nail lamps

You can extend your UV nail lamp’s life by using original or branded lamps. Using low quality products does not work for a long time and their usage can damage your nails and also your gel polishes. So, always prefer to use branded and genuine equipment to avoid any issues.

These are some tips to help you extend the lifespan of your UV lamp and make it work for longer time. Follow these tips and enjoy your favorite gel polishes for a longer period of time.

Tips to Extend the Lifespan of Your UV LED Lamp’s Power Adapter

As your UV LED lamp’s power adapter ages, it may not work as well as it did when it was new. This can cause the lamp to not turn on or to not emit light at the correct intensity.

Fortunately, there are a few things you can do to help extend the life of its power adapter and keep your nail lamp working its best.

  1. The first thing you can do is to keep the power adapter away from heat and moisture. Exposing it to high temperatures or moisture can cause the adapter to overheat or corrode, which can shorten its lifespan.
  2. You can also help to keep the adapter cool by making sure there is plenty of air circulation around it. Avoid placing it under an ultraviolet nail lamp or near any heat source, since this can make the adapter overheat. You should also avoid covering the power adapter with cloth or other material that will trap heat near it.
  3. When you are not using your light for at least 30 minutes, be sure to unplug it’s power adapter from its electrical outlet. If you leave it plugged in when it’s not in use, the adapter might overheat and could be damaged as a result.

Now that you know how to keep its power adapter in good condition, you can rest assured that your UV LED lamp will last for many years.

UV LED Nail Lamp Not Working - A Checklist To Follow

Tips to Extend the Lifespan of Your UV LED Lamp’s Circuit Board

There are also some ways to make sure that your UV LED Lamp is always working in the best condition.

1. Keep your UV LED lamp in a cool, dry place.

The hotter your UV LED lamp gets, the more strain it will put on its circuit board. Keeping it in a cool, dry place will help to extend its lifespan.

2. Avoid exposing your UV LED lamp to water or moisture.

If your UV LED lamp comes into contact with any water or moisture, it can cause serious damage to its circuit board. Make sure to keep it away from any spills or wet surfaces.

3. Don’t overload your UV LED lamp with too many nails at once.

If you try to use your UV LED lamp for too many nails at once, it can put strain on its circuit board and cause the unit to overheat.

4. Avoid using your UV LED lamp for an extended period of time without giving it a break.

If you’re not going to be using your UV LED lamp for an extended period of time, make sure that you turn it off. This will help to prevent any damage to its circuit board.

By following these tips, you can help to extend the lifespan of your UV LED lamp’s circuit board and keep it in the best condition possible.

You Can Use a Backup for Your UV LED Lamp

This is also another way you can do it if your UV LED lamp is not functioning. You can also use a backup for your UV LED lamp. If your UV LED lamp is not functioning, you can use this sun-powered rechargeable 6W light.

We earn a commission if you make a purchase, at no additional cost to you.
09/24/2023 12:13 am GMT

This light is very small, so it can be taken with you wherever you go. It also has a built-in battery, so you don’t have to worry about bringing extra batteries with you. This light is perfect for on-the-go use.

You can also use this light as a regular flashlight. If you are looking for a small and affordable flashlight, then this is the perfect one for you. It also has a built-in rechargeable battery.

This light is also great for emergencies, as you don’t have to worry about bringing extra batteries with you. You can just take this light with you wherever you go and use it if there are emergency cases. This flashlight can last up to 4 hours per use.

UV LED Nail Lamp Important?

In recent years, there has been an increase in the popularity of UV LED lamps. This is because they are a more efficient and safer option than traditional UV nail lamps.

UV LED lamps are important because they offer a variety of benefits that include:

1. They are more energy-efficient than traditional UV nail lamps.

2. They are safer because they emit no U-VB (ultraviolet radiation).

3. They can be used on all gel applications, including regular polish and false nails.

4. They offer greater consistency of curing times with the same amount of exposure. 5. Most UV LED lamps come with added benefits like timers, heaters, and fans.

When choosing a UV LED lamp, it is important to consider the size of the unit. Some lamps are too large to fit comfortably on your desk, while others are too small to offer an effective cure. It is also important to consider the features offered by the particular model you are considering. Some lamps come with timers and heaters, while others do not.

The benefits of a UV LED lamp make them an important tool for any at-home manicurist. If you are considering purchasing a UV LED lamp, be sure to research the different models available to find the one that best meets your needs.​

What Is An Alternative to Using a UV LED Lamp?

If you don’t have a UV LED lamp, you can also use other nail curing alternatives like a nail dryer set at a low heat, a fan, or a portable battery-operated UV light.

The difference is that, most of these alternatives will not be able to offer the same consistency in curing times.

For example, if you’re using a battery-operated UV light, you’ll need to hold it directly above your nails for several minutes. Doing this is time consuming and can be difficult with larger nails or multiple hand/nail treatments like false nail application. In addition, you’ll have to hold it above your nail for a few minutes in order to get the same level of curing with each coat.

In most cases, these alternatives will take longer and result in less consistency in curing times when compared with using a UV LED lamp. This can be important if you want an even and thorough cure on all of your nails.

When choosing a UV LED lamp, it is important to consider the size of the unit. Some lamps are too large to fit comfortably on your desk, while others are too small to offer an effective cure. It is also important to consider the features offered by the particular model you are considering. Some lamps come with timers and heaters, while others do not.

The benefits of a UV LED lamp make them an important tool for any at-home manicurist. If you are considering purchasing a UV LED nail lamp, be sure to research the different models available to find the one that best meets your needs.​

How Do You Use a UV LED Lamp?

Using a UV LED lamp is easy. Simply follow the instructions on your specific model to ensure you’re using it properly and safely. A few tips may include:

1. Always choose a UV LED lamp that meets the specific needs of your gel application (i.e., normal or false nails).

2. Make sure the lamp is properly positioned on your nails for even curing.

3. Follow the manufacturer’s instructions for use and safety.

4. Never look directly at the UV LED light while it is curing your nails – this can be harmful to your eyesight.

5. Keep the UV LED lamp out of reach of children and pets.

6. If the nail lamp has a UV filter, make sure it is properly installed.

7. Keep your nails away from water for an additional 60-90 seconds following the curing process to allow them to set properly before applying topcoat or base coat polish.

Generally speaking , you’ll need to complete all steps of your at-home manicure – including filing, cuticle care, basecoat, color, and topcoat – before using a UV LED lamp.

Conclusion

UV LED lamps are an important tool for any at-home manicure. If you’re looking to purchase a UV LED nail lamp, be sure to research the different models available so that you can find one that best meets your needs.

Knowing how to troubleshoot a UV LED lamp that is not working properly can help you get your nails done right at home.​ If you don’t have a UV LED lamp, there are alternatives like using other nail curing alternatives like a nail dryer set at a low heat, or a fan.

UV LED Nail Lamp Not Working - A Checklist To Follow